Posted on 3/21/2018 10:10 PM By Garry Bryant
ARLINGTON HEIGHTS, March 19, 2018 – Air Movement and Control Association (AMCA) International Inc. welcomed 90 consulting and application engineers, HVAC technicians, code officials, and product designers to San Antonio, Texas, March 6 and 7 for the inaugural Air System Engineering and Technology (ASET) Conference–US (ASET-US). The technical program was divided into two tracks—Air-Systems Design and Air Products & Technologies—with attendees free to attend sessions across tracks.
Posted on 2/18/2018 9:55 PM By Garry Bryant
Ruskin®, announces eight of its hurricane and wind-driven rain louvers are now Texas Department of Insurance (TDI) listed. This means the louver assemblies satisfy the TDI criteria for protection from windborne debris in both the Texas 120 mph Inland I zone and the 130 mph Seaward zone.
Posted on 1/17/2018 1:42 PM By Garry Bryant
Two new Minicore energy recovery ventilators (ERVs) from Ruskin — enERVent models MCV500 and MCV1000 — exceed 50 to 60 percent total energy recovery effectiveness with 0 percent cross-contamination.
Posted on 1/8/2018 1:50 AM By Garry Bryant
Watch the new installation video, showing the installation of the TDP05K, Ruskin's Advanced Thermal Dispersion Airflow and Temperature Measuring Probe within rectangular and round/spiral duct.
Posted on 12/19/2017 12:11 AM By Garry Bryant
Ruskin has increased the over-all size of the IBDT Thin Line Fire Dampers to 36" x 36". This increased the height from 12" to 36" tall (33% larger).
Posted on 12/13/2017 11:52 PM By Garry Bryant
Ruskin is actively involved with the NFPA, ICC, NASFM, AMCA and other agencies to continuously evaluate and improve upon our passive fire protection products for increased life safety of buildings and in turn, the public. The most recent is Project Fail Safe with Fire Safe North America and National Association of State Fire Marshals. The initial data from the proprietary MATRIXᵀᴹ tool shows a decrease in building safety due to the decline in passive fire protection, such as life safety dampers. New Release and reports below.
Posted on 11/9/2017 11:21 PM By Garry Bryant
Ruskin recently expanded its Parsons, Kansas, manufacturing plant with a 5,000-square-foot addition to the existing facility. Opened in August, the new space supports production of the TDP05K advanced thermal dispersion air measurement system introduced earlier this year.
Posted on 1/22/2017 4:28 PM By Garry Bryant
ABDs provide reliable, precise and automatic airflow regulation for supply and exhaust applications, helping improve occupant comfort
Posted on 6/12/2001 11:00 AM By Garry Bryant
Ruskin manufactures two different combination fire/smoke dampers for applications in a shaft wall where there is no access on the non-grille side. What's the difference between them?